Thanks for opening the issue internally.
Here is an update.
We opted to uninstall (unistall.sh and removed all related subsystems entries) and re-install Centrify Express and Samba Integration then we saw your message.Hopefully, what has happened can help your folks help us.
The entire process was done as root. No sudo. No su. Straight root.
During the reinstall it hung in the same place as before.
Here is the result:
WARNING: Centrify adcheck exited with warning(s). Unzipping ./centrifydc-5.4.2-aix7.1-ppc-bff.gz to /var/centrify/install-tmp* ... Unzipping ./centrifydc-openssl-5.4.2-aix7.1-ppc-bff.gz to /var/centrify/install-tmp* ... Unzipping ./centrifydc-openldap-5.4.2-aix7.1-ppc-bff.gz to /var/centrify/install-tmp* ... Unzipping ./centrifydc-curl-5.4.2-aix7.1-ppc-bff.gz to /var/centrify/install-tmp* ... Installing all from spool dir ... Joining the Active Directory domain pg.local ... Using domain controller: dc3.pg.local writable=true Join to domain:pg.local, zone:Auto Zone successful Centrify DirectControl started.
The warning came from DOMNAME and using.local as part of the FDQN.
Here are the errpt entries:
They begin with
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: A924A5FC
Date/Time: Thu Dec 14 12:02:47 CST 2017
Sequence Number: 869
Node Id: psa
Class: S
Type: PERM
WPAR: Global
Resource Name: SYSPROC
Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED
Probable Causes
SOFTWARE PROGRAM
User Causes
USER GENERATED SIGNAL
Recommended Actions
CORRECT THEN RETRY
Failure Causes
SOFTWARE PROGRAM
Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE
Detail Data
SIGNAL NUMBER
6
USER'S PROCESS ID:
2490692
FILE SYSTEM SERIAL NUMBER
4
INODE NUMBER
65536
CORE FILE NAME
/var/centrifydc/core
PROGRAM NAME
adclient
STACK EXECUTION DISABLED
0
COME FROM ADDRESS REGISTER
thread_se 1FC
PROCESSOR ID
hw_fru_id: N/A
hw_cpu_id: N/A
ADDITIONAL INFORMATION
_set_canc 48
??
pthread_s 64
pthread_s 14
_ZN4cims4 E0
_ZN4cims4 20
_ZN4cims1 24
_ZN4cims8 544
_ZN4cimsL 148
_ZN4cims6 1C4
_ZN4cims9 16AC
main 4D70
__start 74
Symptom Data
REPORTABLE
1
INTERNAL ERROR
0
SYMPTOM CODE
PCSS/SPI2 FLDS/adclient SIG/6 FLDS/_set_canc VALU/48Followed by..
---------------------------------------------------------------------------
LABEL: SRC_SVKO
IDENTIFIER: BC3BE5A3
Date/Time: Thu Dec 14 12:20:08 CST 2017
Sequence Number: 872
Node Id: psa
Class: S
Type: PERM
WPAR: Global
Resource Name: SRC
Description
SOFTWARE PROGRAM ERROR
Probable Causes
APPLICATION PROGRAM
Failure Causes
SOFTWARE PROGRAM
Recommended Actions
MANUALLY RESTART SUBSYSTEM IF NEEDED
Detail Data
SYMPTOM CODE
393222
SOFTWARE ERROR CODE
-9017
ERROR CODE
0
DETECTING MODULE
'srchevn.c'@line:'376'
FAILING MODULE
centrifydc
---------------------------------------------------------------------------
LABEL: SRC_SVKO
IDENTIFIER: BC3BE5A3
Date/Time: Thu Dec 14 12:11:18 CST 2017
Sequence Number: 871
Node Id: psa
Class: S
Type: PERM
WPAR: Global
Resource Name: SRC
Description
SOFTWARE PROGRAM ERROR
Probable Causes
APPLICATION PROGRAM
Failure Causes
SOFTWARE PROGRAM
Recommended Actions
MANUALLY RESTART SUBSYSTEM IF NEEDED
Detail Data
SYMPTOM CODE
393222
SOFTWARE ERROR CODE
-9017
ERROR CODE
0
DETECTING MODULE
'srchevn.c'@line:'376'
FAILING MODULE
centrifydc
---------------------------------------------------------------------------
LABEL: SRC_SVKO
IDENTIFIER: BC3BE5A3
Date/Time: Thu Dec 14 12:02:47 CST 2017
Sequence Number: 870
Node Id: psa
Class: S
Type: PERM
WPAR: Global
Resource Name: SRC
Description
SOFTWARE PROGRAM ERROR
Probable Causes
APPLICATION PROGRAM
Failure Causes
SOFTWARE PROGRAM
Recommended Actions
MANUALLY RESTART SUBSYSTEM IF NEEDED
Detail Data
SYMPTOM CODE
393350
SOFTWARE ERROR CODE
-9017
ERROR CODE
0
DETECTING MODULE
'srchevn.c'@line:'376'
FAILING MODULE
centrifydcLooks like the program is trying to recover/restart but just can't.